SystemOn
所有版本
发布日期
下载
Important
- New licenses are no longer being offered. For maintenance licenses, please contact your local Shure representative.
Improvements
- Device-related software improvements for enhanced operations
Pre-Upgrade Requirements
- Designer and SystemOn cannot be installed on the same computer
- Internet access is no longer required during the installation process; however, use of certain features like firmware updating and text notifications require internet access
- After upgrading SystemOn, clear your browser cache on the device accessing the SystemOn server, then re-assign your licenses to your devices by navigating to your organization > Licenses > Start managing
- SystemOn and Designer applications cannot be installed on the same computer; do not attempt to install one over the other
- Before updating firmware, turn off “Device Missing” notifications, then turn them back on after completing the firmware updates
Platform Requirements
- Supported Operating Systems
- Windows Server 2019
- Windows 10 (Professional or Enterprise), 64-bit edition
- Supported Web Browsers
- Chrome
- Safari
- Windows Edge
- Hardware Minimum Requirements
- 8 GB RAM (16 GB may be required when hundreds of devices are being accessed)
- 2 GB hard disk
- i5 dual-core processor
Notes
- User Guide
- To update firmware, please download Shure Update Utility
- This version of SystemOn is compatible with the following recommended software and firmware versions:
- IntelliMix Room 4.2.0
- ANIUSB-MATRIX 4.7.21
- MXA310 4.7.8
- MXA710 1.5.16
- MXA910 4.7.13
- MXA920 1.5.22
- MXA-MUTE 1.5.17
- MXN5-C 1.5.21
- Microflex Wireless 10.0.8
- P300 4.7.21
- SBC220/240 1.4.7
- SBC250/450/850 2.7.3
- SCM820 1.4.3
- ULX-D 2.7.3
Important
- New licenses are no longer being offered. For maintenance licenses, please contact your local Shure representative.
Bug Fixes
- LDAP server configuration validation for port 636; password and username validation for port 389 errors during upgrade from SystemOn version 4.6.0 to 4.7.0
Pre-Upgrade Requirements
- Designer and SystemOn cannot be installed on the same computer
- Internet access is no longer required during the installation process; however, use of certain features like firmware updating and text notifications require internet access
- After upgrading SystemOn, clear your browser cache on the device accessing the SystemOn server, then re-assign your licenses to your devices by navigating to your organization > Licenses > Start managing
- SystemOn and Designer applications cannot be installed on the same computer; do not attempt to install one over the other
- Before updating firmware, turn off “Device Missing” notifications, then turn them back on after completing the firmware updates
Platform Requirements
- Supported Operating Systems
- Windows Server 2019
- Windows 10 (Professional or Enterprise), 64-bit edition
- Supported Web Browsers
- Chrome
- Safari
- Windows Edge
- Hardware Minimum Requirements
- 8 GB RAM (16 GB may be required when hundreds of devices are being accessed)
- 2 GB hard disk
- i5 dual-core processor
Notes
- User Guide
- To update firmware, please download Shure Update Utility
- This version of SystemOn is compatible with the following recommended software and firmware versions:
- IntelliMix Room 3.3.0
- ANIUSB-MATRIX 4.7.16
- MXA310 4.7.8
- MXA710 1.5.15
- MXA910 4.7.13
- MXA920 1.3.276
- MXA-MUTE 1.5.16
- MXN5-C 1.5.12
- Microflex Wireless 10.0.6
- P300 4.7.17
- SBC220/240 1.3.45
- SBC250/450/850 2.6.3
- SCM820 1.4.3
- ULX-D 2.6.3
Bug Fixes
- In certain environments, user is unable to add cross-subnet devices using Add by IP feature
- In the transmitter tab, ULXD transmitters display Battery health = 255% and Cycle count = 65535 when using non-Shure batteries
- In the Monitoring view, ULXD transmitter battery status will display number of remaining minutes when below 15 minutes and it should display Empty
- In certain network environments, when using 500 or more devices, some devices will not be discovered
Pre-Upgrade Requirements
- Designer and SystemOn cannot be installed on the same computer
- Internet access is no longer required during the installation process; however, use of certain features like firmware updating and text notifications require internet access
- After upgrading SystemOn, clear your browser cache on the device accessing the SystemOn server, then re-assign your licenses to your devices by navigating to your organization > Licenses > Start managing
- SystemOn and Designer applications cannot be installed on the same computer; do not attempt to install one over the other
- Before updating firmware, turn off “Device Missing” notifications, then turn them back on after completing the firmware updates
Platform Requirements
- Supported Operating Systems
- Windows Server 2019
- Windows 10 (Professional or Enterprise), 64-bit edition
- Supported Web Browsers
- Chrome
- Safari
- Windows Edge
- Hardware Minimum Requirements
- 8 GB RAM (16 GB may be required when hundreds of devices are being accessed)
- 2 GB hard disk
- i5 dual-core processor
Known Issues
- When using a virtual machine, it’s recommended to dedicate hardware resources (HD, RAM, etc.) to the SystemOn application; using shared resources may cause Shure services to not start on reboot
- When a device is being firmware updated, it will appear offline during the update in SystemOn
- Discovering MXW microphones may take longer than 1 minute
- UTC time and date are displayed on Event Log and Email/SMS notifications
- For users setting up SMS notifications, the Senders Phone Number field does not show the required (*), but the field is required
- If a valid license activation ID is applied and fails on the first attempt, please try again before calling support
Notes
- User Guide
- To update firmware, please download Shure Update Utility
- This version of SystemOn is compatible with the following recommended software and firmware versions:
- IntelliMix Room 3.3.0
- ANIUSB-MATRIX 4.7.16
- MXA310 4.7.8
- MXA710 1.5.13
- MXA910 4.7.13
- MXA920 1.1.161
- MXA-MUTE 1.5.15
- MXN5-C 1.5.12
- Microflex Wireless 10.0.6
- P300 4.7.11
- SBC220/240 1.3.26
- SBC250/450/850 2.6.3
- SCM820 1.4.3
- ULX-D 2.6.3
Improvements
- Stability and Performance
Pre-Upgrade Requirements
- Internet access is no longer required during the installation process; however, use of certain features like firmware updating and text notifications require internet access
- After upgrading SystemOn, clear your browser cache on the device accessing the SystemOn server, then re-assign your licenses to your devices by navigating to your organization > Licenses > Start managing
- SystemOn and Designer applications cannot be installed on the same computer; do not attempt to install one over the other
- Before updating firmware, turn off “Device Missing” notifications, then turn them back on after completing the firmware updates
Known Issues
- When using a virtual machine, it’s recommended to dedicate hardware resources (HD, RAM, etc.) to the SystemOn application; using shared resources may cause Shure services to not start on reboot
- When a device is being firmware updated, it will appear offline during the update in SystemOn
- ULX-D transmitters using non-Shure batteries will show in the transmitter list with incorrect values for battery cycle count and health
- Discovering MXW microphones may take longer than 1 minute
- UTC time and date are displayed on Event Log and Email/SMS notifications
- For users setting up SMS notifications, the Senders Phone Number field does not show the required (*), but the field is required
- If a valid license activation ID is applied and fails on the first attempt, please try again before calling support
Notes
- User Guide
- To update firmware, please download Shure Update Utility
- This version of SystemOn is compatible with the following software and firmware versions:
- IntelliMix Room 3.2.0
- ANIUSB-MATRIX 4.6.7
- MXA310 4.6.3
- MXA910 4.6.6
- MXA710 1.4.2
- MXA-MUTE 1.4.4
- MXN5-C 1.4.3
- Microflex Wireless 9.0.4
- P300 4.6.6
- ULX-D 2.5.0
- SBC220/240 2.5.0
- SBC250/450/850 2.5.0
Performance Improvements
- Support for latest firmware
- Improved stability and performance
Pre-Upgrade Requirements
- Internet access is no longer required during the installation process; however, use of certain features like firmware updating and text notifications require internet access
- After upgrading SystemOn, clear your browser cache on the device accessing the SystemOn server, then re-assign your licenses to your devices by navigating to your organization > Licenses > Start managing
- SystemOn and Designer applications cannot be installed on the same computer; do not attempt to install one over the other
- Before updating firmware, turn off “Device Missing” notifications, then turn them back on after completing the firmware updates
Known Issues
- When using a virtual machine, it’s recommended to dedicate hardware resources (HD, RAM, etc.) to the virtual machine running the SystemOn application; using shared resources may cause Shure services to not start on reboot
- When a device is being firmware updated, it will appear offline during the update in SystemOn
- ULX-D transmitters using non-Shure batteries will show in the transmitter list with incorrect values for battery cycle count and health
- After attempting to forget cross-subnet devices, devices must be rebooted, then SystemOn server must be rebooted before the devices will disappear from SystemOn
- Discovering MXW microphones may take longer than 1 minute
- UTC time and date are displayed on Event Log and Email/SMS notifications
- For users setting up SMS notifications, the Senders Phone Number field does not show the required (*), but the field is required
- If a valid license activation ID is applied and fails on the first attempt, please try again before calling support
Notes
- User Guide
- SystemOn 4.5.0 is compatible with the following software and firmware versions:
- IntelliMix Room 3.1.0
- ANIUSB-MATRIX 4.5.23
- MXA310 4.5.8
- MXA910 4.5.8
- MXA710 1.3.9
- MXA-MUTE 1.3.28
- MXN5-C 1.3.8
- Microflex Wireless 9.0.4
- P300 4.5.13
- ULX-D 2.5.0
- SBC220/240 2.5.0
- SBC250/450/850 2.5.0
Important
- Upgrading directly from older versions such as SystemOn 3.0 or 3.1 to this version is not supported, nor is importing project files from 3.0 or 3.1 directly into 4.4.1; it's recommended that you upgrade to version 3.2 first (download here), then to 4.4.1 to maintain all projects.
- After upgrading SystemOn, clear your browser cache on the device accessing the SystemOn server, then re-assign your licenses to your devices by navigating to your organization > Licenses > Start managing
- SystemOn cannot be installed on the same machine as Designer; do not attempt to install one over the other
- Before updating firmware, turn off “Device Missing” notifications, then turn them back on after completing the firmware updates
- SystemOn may not allow downgrading of some P300s due to a platform update to support future functionality and USB improvements.
Improvements
- Support for latest firmware — see the Notes section below for compatible versions
Bug fixes
- ‘System not available' screen shows when opening SystemOn depending on Microsoft VC++ Redistributable versions installed on the machine
- Various other bug fixes
Known Issues
- When using a virtual machine, it’s recommended to dedicate hardware resources (HD, RAM, etc.) to the SystemOn application; using shared resources may cause Shure services to not start on reboot
- When a device is being firmware updated, it will appear offline during the update in SystemOn
- ULX-D transmitters using non-Shure batteries will show in the transmitter list with incorrect values for battery cycle count and health
- After attempting to forget cross-subnet devices, devices must be rebooted, then SystemOn server must be rebooted before the devices will disappear from SystemOn
- Discovering MXW microphones may take more than 1 minute
- UTC time and date are displayed on Event Log and Email/SMS notifications.
- For users setting up SMS notifications, the Senders Phone Number field does not show the required (*), but the field is required.
- If a valid license activation ID is applied and fails on the first attempt, please try again before calling support.
Notes
- Internet access is no longer required during the installation process; however, use of certain features like firmware updating and text notifications require internet access
- Designer and SystemOn cannot be installed on the same machine
- To operate SystemOn 4.4.0 with Shure networked systems, see the following list of supported firmware versions:
- MXW 8.0.3 – 9.0.4
- SCM820 1.3.3
- ULX-D 2.2.24 – 2.4.25
- SBC220/240 1.1.43 – 1.2.73
- SBC250/450/850 2.2.24 – 2.4.13
- MXA910 4.1.41 – 4.4.11
- MXA710 1.1.X –1.2.1
- MXA310 4.1.37 – 4.4.9
- P300 4.1.11 – 4.4.13
- IMX-ROOM 1.0.4.2 – 3.0.1
- ANIUSB-MATRIX 4.1.39 – 4.4.14
- MXN5-C 1.1.X – 1.2.1
- MXA-MUTE 1.1.X -- 1.2.4
- Please report SystemOn performance issues experienced on supported browsers to Shure Support.
- For help and troubleshooting, go to the SystemOn System Requirements, SystemOn User Guide or FAQs
Important
- After upgrading SystemOn, clear your browser cache on the device accessing the SystemOn server, then re-assign your licenses to your devices by navigating to your organization > Licenses > Start managing
- SystemOn cannot be installed on the same machine as Designer; do not attempt to install one over the other
- Before updating firmware, turn off “Device Missing” notifications, then turn them back on after completing the firmware updates
- SystemOn may not allow downgrading of some P300s due to a platform update to support future functionality and USB improvements.
Improvements
- Support for new firmware versions
- Usability improvements
- Bug fixes and performance improvements
Known Issues
- When using a virtual machine, it’s recommended to dedicate hardware resources (HD, RAM, etc.) to the SystemOn application; using shared resources may cause Shure services to not start on reboot
- When a device is being firmware updated, it will appear offline during the update in SystemOn
- When marking a notification as read, the notifications list may flicker
- ULX-D transmitters using non-Shure batteries will show in the transmitter list with incorrect values for battery cycle count and health
- After attempting to forget cross-subnet devices, devices must be rebooted, then SystemOn server must be rebooted before the devices will disappear from SystemOn
- Discovering MXW microphones may take more than 1 minute
- UTC time and date are displayed on Event Log and Email/SMS notifications.
- For users setting up SMS notifications, the Senders Phone Number field does not show the required (*), but the field is required.
- If a valid license activation ID is applied and fails on the first attempt, please try again before calling support.
Notes
- Internet access is no longer required during the installation process; however, use of certain features like firmware updating and text notifications require internet access
- Designer and SystemOn cannot be installed on the same machine
- To operate SystemOn 4.3.0 with Shure networked systems, see the following list of supported firmware versions:
- MXW 8.0.3 – 9.0.4
- SCM820 1.3.3
- ULX-D 2.2.24 – 2.4.9
- SBC220/240 1.1.43 – 1.2.73
- SBC250/450/850 2.2.24 – 2.4.13
- MXA910 4.1.41 – 4.3.2
- MXA710 1.1.5
- MXA310 4.1.37 – 4.3.6
- P300 4.1.11 – 4.3.7
- IMX-ROOM 1.0.4.2 – 2.0.2
- ANIUSB-MATRIX 4.1.39 – 4.3.11
- MXN5-C 1.1.1
- MXA-MUTE 1.1.3
- Please report SystemOn performance issues experienced on supported browsers to Shure Support.
- For help and troubleshooting, go to the SystemOn System Requirements, SystemOn User Guide or FAQs
Important
- After upgrading SystemOn, clear your browser cache on the device accessing the SystemOn server, then re-assign your licenses to your devices by navigating to your organization > Licenses > Start managing
- SystemOn cannot be installed on the same machine as Designer; do not attempt to install one over the other
- Before updating firmware, turn off “Device Missing” notifications, then turn them back on after completing the firmware updates
Improvements
- Support for new products:
- IntelliMix® Room Audio Processing Software
- MXA710 Linear Array Microphone
- MXN5-C Networked Loudspeaker
- MXA Network Mute Button
- Support for new firmware versions
- Support for same-subnet and cross-subnet firmware updating of the following products:
- MXA910
- MXA710
- MXA310
- P300
- ANIUSB-MATRIX
- MXN5-C
- MXA-MUTE
- License widget on dashboard
- UI improvements
Known Issues
- When using a virtual machine, it’s recommended to dedicate hardware resources (HD, RAM, etc.) to the SystemOn application; using shared resources may cause Shure services to not start on reboot
- After attempting to forget cross-subnet devices, devices must be rebooted, then SystemOn server must be rebooted before the devices will disappear from SystemOn
- Discovering MXW microphones may take more than 1 minute
- UTC time and date are displayed on Event Log and Email/SMS notifications.
- For users setting up SMS notifications, the Senders Phone Number field does not show the required (*), but the field is required.
- If a valid license activation ID is applied and fails on the first attempt, please try again before calling support.
Notes
- To operate SystemOn 4.2 with Shure networked systems, see the following list of supported firmware versions:
- MXW 8.0.3 – 9.0.4
- SCM820 1.3.3
- ULX-D 2.2.24 – 2.4.9
- SBC220/240 1.1.43 – 1.2.73
- SBC250/450/850 2.2.24 – 2.4.9
- MXA910 4.1.41 – 4.2.18
- MXA710 1.0.5
- MXA310 4.1.37 – 4.2.18
- P300 4.1.11 – 4.2.4
- IMX-ROOM 1.0.4.2 – 2.0.1.186
- ANIUSB-MATRIX 4.1.39 – 4.2.19
- MXN5-C 1.0.6
- MXA-MUTE 1.0.8
- Please report SystemOn performance issues experienced on supported browsers to Shure Support.
- For help and troubleshooting, go to the SystemOn System Requirements, SystemOn User Guide or FAQs
Improvements
- Support for MXA910 firmware version 4.0.12 with IntelliMix® DSP
- Bug fixes
Known Issues
- Discovering MXW microphones may take more than 1 minute
- If a single location has more than 32 devices, the audio metering quality will decrease
- UTC time and date are displayed on Event Log and Email/SMS notifications.
- Navigating through an Event Log with hundreds of events may be slow or could cause the system to time out.
- For non-English users setting up SMS notifications, the Senders Phone Number field does not show the required (*), but the field is required.
- If a valid license activation ID is applied and fails on the first attempt, please try again before calling support.
Notes
- To operate SystemOn 3.2 with Shure networked systems, see the following list of supported firmware versions:
- SCM820 1.3.3
- ULX-D 2.2.24 – 2.3.34
- MXW 5.2.2 – 6.0.3
- MXA910 3.15 – 4.0.12
- MXA310 3.1.5
- P300 3.1.6
- ANIUSB-MATRIX 3.1.5
- SBC220/240 1.1.43 – 1.1.62
- SBC250/450/850 2.2.24 – 2.3.6
- Please report SystemOn performance issues experienced on supported browsers to Shure Support.
- For help and troubleshooting, go to the SystemOn User Guide or FAQs
改进
支持新产品:
- MXA910 吊顶矩阵话筒
- MXA310 桌面矩阵话筒
- P300 IntelliMix®音频会议处理器
- ANIUSB-Matrix USB音频网络接口
- ULXD6无线界面话筒发射机
- ULXD8 无线鹅颈底座发射机
- SBC220 双插座充电站
- SBC450 4单元联网充电器
- SBC850 8单元联网充电器
对已支持产品提供新的固件版本:
- ULX-D 2.3.21
- Microflex Wireless 6.0.3
错误修复
已知问题
- 单一地点可检测超过32个设备的情况
- 在活动记录以及邮件或短信通知上显示标准时间和日期
- 在数百个活动导致的缓慢运行或系统超时的情况下,依然提供活动记录指引
- 为非英语用户设置短信通知,发件人号码能够隐藏
- 如果第一次尝试用有效许可证激活ID师表,请先再次尝试后拨打支持热线
备注
以下舒尔产品固件版本适用于SystemOn 3.1版本:
- SCM820 1.3.3
- ULX-D 2.2.24 – 2.3.21
- MXW 5.2.2 – 6.0.3
- MXA910 3.1.5
- MXA310 3.1.5
- P300 3.1.5
- ANIUSB-MATRIX 3.1.5
- SBC220/240 1.1.43 – 1.1.62
- SBC250/450/850 2.2.24 – 2.3.6
有关SystemOn性能问题,请向舒尔报告Shure Support
相关帮助及故障排除,请访问SystemOn 用户指南或FAQs
更新:SystemOn 3.0.1支持更新到2.3.4的ULX-D设备,但不支持2.3.4版本上的ULX-D的新硬件版本。
已知问题
对于不支持的固件版本,SystemOn 3.0.1会错误发出警告“Check system requirements, your current firmware version may not be confirmed compatible”(检查系统要求,当前固件版本可能无法确认兼容)。
要在舒尔无线系统中使用SystemOn 3.0.1,请参考下表以了解所支持的固件版本:
- SCM810 1.3.3
- ULX-D 1.7.34 - 2.3.4
o ULX-D J50A or L50A frequency bands are not supported
o 不支持ULX-D J50A或L50A频段
o ULX-D new hardware revisions are not supported
o 不支持ULX-D新硬件版本
- MXW 4.0.6 – 6.0.3
更新:2018年10月30日:SystemOn 3.0.1支持MXW 6.0.3版本;但是,会错误发出警告“Check system requirements, your current firmware version may not be confirmed compatible.”(检查系统要求,当前固件版本可能无法确认兼容。)
要在舒尔无线系统中使用SystemOn 3.0.1,请参考下表以了解所支持的固件版本:
- SCM820 1.3.3
- SCM820 1.3.3
- ULX-D 1.7.34 - 2.2.24
- ULX-D 1.7.34 - 2.2.24
o ULX-D J50A or L50A frequency bands are not supported
o 不支持ULX-D J50A或L50A频段
- MXW 4.0.6 – 6.0.3
- MXW 4.0.6 – 6.0.3
更新:SystemOn将通知用户ULX-D 2.2.24可能不兼容;然而,只有J50A或L50A频带上的ULX-D设备与SystemOn 2.0-3.0.1不兼容。
更新:
- SystemOn 3.0.1支持MXW 5.2.2;但是,SystemOn会错误发出警告“Check system requirements, your current firmware version may not be confirmed compatible.”(检查系统要求,当前固件版本可能无法确认兼容。)请忽略此警告。
- MXW 5.2.2解决了以前的一个问题,即发现MXW话筒可能需要一分钟以上。
- 对SystemOn 3.0.1进行了改进,之前报告缺少设备所需的时间增加到了3-4分钟,现在可能维持在1分钟。
新功能
- 主页上显示“目录摘要”信息
- 发射机列表显示电池健康状况和已连接设备的信息
改进功能
- 增加与ULX-D ULXD1/2/4/4D/4Q版本2.1.16的兼容性
- 提升性能
已知问题
- 无法对具有超过32个设备的单个位置进行质量测量
- UTC时间和日期会显示在“事件日志”和“电子邮件/短信”通知上。
- 在具有数百个事件的“事件日志”间导航可能会很慢或可能导致系统超时。
- 对于设置短信通知的非英语用户,“发信人电话号码”字段不显示(*)必填字段,但该字段是必填的。
- 当激活ID授权时,如果首次尝试激活失败,请在拨打支持热线之前再试一次。
改进功能
- 增加与ULX-D固件版本2.0.19的兼容性
- 提升性能
已知问题
- 在通道名称中使用字符{or}后,“通道名称”字段显示为灰色,在大约10秒钟内不能再更改。
- 在Microflex Wireless MXW1的“设备属性”中,“固件版本”字段错误地显示固件版本可能不兼容。
- 当在ULXD4/D/Q上激活访问控制时,接收机在SystemOn 2.1中不可见。
- SystemOn 2.1不提供远程Microflex Wireless发射机链接。未来的软件更新中将会提供此功能。
- SystemOn 2.1不提供Microflex Wireless音频和射频计量信息。未来的软件更新中将会提供此功能。
- UTC时间和日期会显示在“事件日志”和“电子邮件/短信”通知上。
- 如果使用的许可激活ID有效,而首次尝试激活失败,请在拨打支持热线之前再试一次。
- 监视小工具可能在短时间内针对Microflex Wireless (MXW)和ULX-D话筒显示错误字符。
- 某些语言可能显示截断的字词或句子。
说明
- 要在舒尔无线系统中使用SystemOn 2.1,请参考以下列表以了解SystemOn 2.1支持的固件版本:
- SCM820 1.3.3
- ULX-D 1.7.34 - 2.0.19
- MXW 4.0.6 - 4.0.7
- 如果在Internet Explorer和Microsoft Edge浏览器上使用SystemOn 2.1时遇到任何性能问题,请联系舒尔亚洲支持中心。
已知问题
- SystemOn 2.0不提供远程Microflex Wireless发射机连接。未来的软件更新中将会提供此功能。
- SystemOn 2.0不提供Microflex Wireless音频和射频计量信息。未来的软件更新中将会提供此功能
- 如果Chrome显示“啊,糟糕”错误页面,请重新加载页面或关闭其他选项卡以修复错误。
- UTC时间和日期会显示在“事件日志”和“电子邮件/短信”通知上。
- 如果使用的许可激活ID有效,而首次尝试激活失败,请在拨打支持热线之前再试一次。
- 在待机模式下,监视小工具可能在短时间内针对Microflex Wireless (MXW)话筒显示错误字符。
备注
- 要在舒尔无线系统中使用SystemOn 2.0,请参考以下列表以了解SystemOn 2.0支持的固件版本:
- SCM820 1.3.3
- ULX-D 1.7.34
- MXW 4.0.6-4.0.7
- 如果在Internet Explorer和Microsoft Edge浏览器上使用SystemOn 2.0时遇到任何性能问题,请联系舒尔亚洲支持中心。
相关联产品
SystemOn
使AV/IT技术人员可以从一个集中平台对大规模舒尔音频硬件部署。支持Microflex™ Wireless, ULX-D™ Digital Wireless, 和SCM820自动混音器.