ANIUSB-MATRIX - Audio Network Interface

Improvements

• Enhancements to support Designer 6.0.0
• Additional hardware support

Known Issues

• An 802.1X re-authorization request interrupts a firmware update and causes it to fail
  • Workaround: restarting the update will resolve the problem
• Pop noise is triggered when the channel is unrouted in Dante controller with encryption enabled
• When exporting Presets using Safari on a Mac OS, the file type is saved incorrectly and must be renamed to .json to be imported.
• In AES67 mode - Audio does not pass after changing Dante Device name, followed by a reboot

Notes

• User Guide
• Command Strings
• To operate this version of ANIUSB-MATRIX with Dante Controller, reference the following minimum versions
  • v3.10.2.4 (Windows)
  • v3.10.2.3 (macOS)
• To operate this version of ANIUSB-MATRIX with Microsoft Teams, reference the following minimum versions: 
  • Microsoft Teams Desktop: 1.3.00.24755 
  • Microsoft Teams Rooms: 4.6.20.0
• To operate this version of ANIUSB-MATRIX with Shure software or other Shure networked systems, reference the following list of recommended versions supported:
  • Designer 6.0.0
  • ANI22/ANI4IN/ANI4OUT 6.0.41
  • MXA310 6.0.23
  • MXA910 6.0.24
  • MXA920 6.0.38
  • MXA901 6.0.39
  • MXA902 6.0.32
  • MXW 10.0.X
  • P300 6.0.38
  • ULXD4D/4Q 2.8.7
  • SCM820 1.4.3
  • Shure Update Utility 2.8.4
  • Shure Web Device Discovery 1.2.17

Improvements

• General backend improvements

Known Issues

• Pop noise is triggered when the channel is unrouted in Dante controller with encryption enabled
• When exporting Presets using Safari on a Mac OS, the file type is saved incorrectly and must be renamed to .json to be imported.
• Shure Audio Encryption is not backward compatible; all devices must be on version 4.1 firmware or newer to use this feature
• When attempting to load the device’s web page after using SUU to upgrade or downgrade between MXA 4.3 and earlier releases, the browser may appear to be stuck on the “Loading” screen with the progress bar continually moving.
  • Workaround: hold your Shift key and click the Refresh button in your browser (or press Ctrl+Shift+R [Win]/Ctrl+F5 [Win]/Cmd+Shift+R [Mac]; note the keyboard shortcut doesn't work on Safari)
• In AES67 mode - Audio does not pass after changing Dante Device name, followed by a reboot

Notes

• User Guide
• Command Strings
• This version of ANIUSB-MATRIX is compatible with ANIUSB-MATRIX devices running older firmware versions, but updating all devices used together to the same firmware version is recommended.
• To operate this version of ANIUSB-MATRIX with Dante Controller, reference the following minimum versions
  • v3.10.2.4 (Windows)
  • v3.10.2.3 (macOS)
• To operate this version of ANIUSB-MATRIX with Microsoft Teams, reference the following minimum versions:
  • Microsoft Teams Desktop: 1.3.00.24755
  • Microsoft Teams Rooms: 4.6.20.0
• To operate this version of ANIUSB-MATRIX with Shure software or other Shure networked systems, reference the following list of recommended versions supported:
  • Designer 4.7.35
  • ANI22/ANI4IN/ANI4OUT 4.7.6
  • MXA310 4.7.8
  • MXA910 4.7.13
  • Microflex Wireless 10.0.8
  • P300 4.7.24
  • ULXD4D/4Q 2.8.6
  • SCM820 1.4.3
  • Shure Update Utility 2.8.3
  • Shure Web Device Discovery 1.2.17

Improvements

• Support for added hardware revisions

Known Issues

• Pop noise is triggered when the channel is unrouted in Dante controller with encryption enabled
• When exporting Presets using Safari on a Mac OS, the file type is saved incorrectly and must be renamed to .json to be imported.
• Shure Audio Encryption is not backward compatible; all devices must be on version 4.1 firmware or newer to use this feature
• When attempting to load the device’s web page after using SUU to upgrade or downgrade between MXA 4.3 and earlier releases, the browser may appear to be stuck on the “Loading” screen with the progress bar continually moving.
  • Workaround: hold your Shift key and click the Refresh button in your browser (or press Ctrl+Shift+R [Win]/Ctrl+F5 [Win]/Cmd+Shift+R [Mac]; note the keyboard shortcut doesn't work on Safari)
• In AES67 mode - Audio does not pass after changing Dante Device name, followed by a reboot

Notes

• User Guide
• Command Strings
• This version of ANIUSB-MATRIX is compatible with ANIUSB-MATRIX devices running older firmware versions, but updating all devices used together to the same firmware version is recommended.
• To operate this version of ANIUSB-MATRIX with Dante Controller, reference the following minimum versions
  • v3.10.2.4 (Windows)
  • v3.10.2.3 (macOS)
• To operate this version of ANIUSB-MATRIX with Microsoft Teams, reference the following minimum versions: 
  • Microsoft Teams Desktop: 1.3.00.24755
  • Microsoft Teams Rooms: 4.6.20.0
• To operate this version of ANIUSB-MATRIX with Shure software or other Shure networked systems, reference the following list of recommended versions supported:
  • Designer 4.7.15
  • ANI22/ANI4IN/ANI4OUT 4.7.6
  • MXA310 4.7.8
  • MXA910 4.7.13
  • Microflex Wireless 10.0.8
  • P300 4.7.21
  • ULXD4D/4Q 2.7.3
  • SCM820 1.4.3
  • Shure Update Utility 2.8.1
  • Shure Web Device Discovery 1.2.17

Improvements

• General enhancements

Known Issues

• Pop noise is triggered when the channel is unrouted in Dante controller with encryption enabled
• When exporting Presets using Safari on a Mac OS, the file type is saved incorrectly and must be renamed to .json to be imported.
• Shure Audio Encryption is not backward compatible; all devices must be on version 4.1 firmware or newer to use this feature
• When attempting to load the device’s web page after using SUU to upgrade or downgrade between MXA 4.3 and earlier releases, the browser may appear to be stuck on the “Loading” screen with the progress bar continually moving.
  • Workaround: hold your Shift key and click the Refresh button in your browser (or press Ctrl+Shift+R [Win]/Ctrl+F5 [Win]/Cmd+Shift+R [Mac]; note the keyboard shortcut doesn't work on Safari)
• In AES67 mode - Audio does not pass after changing Dante Device name, followed by a reboot

Notes

• User Guide
• Command Strings
• This version of ANIUSB-MATRIX is compatible with ANIUSB-MATRIX devices running older firmware versions, but updating all devices used together to the same firmware version is recommended.
• To operate this version of ANIUSB-MATRIX with Dante Controller, reference the following minimum versions
  • v3.10.2.4 (Windows)
  • v3.10.2.3 (macOS)
• To operate this version of ANIUSB-MATRIX with Microsoft Teams, reference the following minimum versions:
  • Microsoft Teams Desktop: 1.3.00.24755
  • Microsoft Teams Rooms: 4.6.20.0
• To operate this version of ANIUSB-MATRIX with Shure software or other Shure networked systems, reference the following list of recommended versions supported:
  • Designer 4.7.0
  • ANI22/ANI4IN/ANI4OUT 4.7.6
  • MXA310 4.7.8
  • MXA910 4.7.13
  • Microflex Wireless 10.0.6
  • P300 4.7.11
  • ULXD4D/4Q 2.6.3
  • SCM820 1.4.3
  • Shure Update Utility 2.7.1
  • Shure Web Device Discovery 1.2.17

New Features

• Web UI support – this feature replaces Thin CUI
• Added logic device type and EQ contour support for the MXA920 Ceiling Array Microphone

Improvements

• Bug fixes

Known Issues

• Pop noise is triggered when the channel is unrouted in Dante controller with encryption enabled
• When exporting Presets using Safari on a Mac OS, the file type is saved incorrectly and must be renamed to .json to be imported.
• Shure Audio Encryption is not backward compatible; all devices must be on version 4.1 firmware or newer to use this feature
• When attempting to load the device’s web page after using SUU to upgrade or downgrade between MXA 4.3 and earlier releases, the browser may appear to be stuck on the “Loading” screen with the progress bar continually moving.
  • Workaround: hold your Shift key and click the Refresh button in your browser (or press Ctrl+Shift+R [Win]/Ctrl+F5 [Win]/Cmd+Shift+R [Mac]; note the keyboard shortcut doesn't work on Safari)
• In AES67 mode - Audio does not pass after changing Dante Device name, followed by a reboot

Notes

• User Guide
• Command Strings
• This version of ANIUSB-MATRIX is compatible with ANIUSB-MATRIX devices running older firmware versions, but updating all devices used together to the same firmware version is recommended.
• To operate this version of ANIUSB-MATRIX with Dante Controller, reference the following minimum versions
  • v3.10.2.4 (Windows)
  • v3.10.2.3 (macOS)
• To operate this version of ANIUSB-MATRIX with Microsoft Teams, reference the following minimum versions:
  • Microsoft Teams Desktop: 1.3.00.24755
  • Microsoft Teams Rooms: 4.6.20.0
• To operate this version of ANIUSB-MATRIX with Shure software or other Shure networked systems, reference the following list of recommended versions supported:
  • Designer 4.7.0
  • ANI22/ANI4IN/ANI4OUT 4.7.6
  • MXA310 4.7.8
  • MXA910 4.7.13
  • Microflex Wireless 10.0.6
  • P300 4.7.11
  • ULXD4D/4Q 2.6.3
  • SCM820 1.4.3
  • Shure Update Utility 2.7.1
  • Shure Web Device Discovery 1.2.17

New Features

• Disable USB Mute Sync communication with software codec platforms

Improvements

• Improved gain, audio routing, and EQ contour settings when using the Designer "Optimize" feature with ANIUSB and Shure microphones

Known Issues

• Pop noise is triggered when the channel is unrouted in Dante controller with encryption enabled
• When exporting Presets using Safari on a Mac OS, the file type is saved incorrectly and must be renamed to .json to be imported.
• Shure Audio Encryption is not backwards compatible; all devices must be on version 4.1 firmware or newer to use this feature
• When attempting to load the device’s web page after using SUU to upgrade or downgrade between MXA 4.3 and earlier releases, the browser may appear to be stuck on the “Loading” screen with the progress bar continually moving. This will typically happen if two upgrades or downgrades are performed within a one-hour period.
  • Workaround: hold your Shift key and click the Refresh button in your browser (or press Ctrl+Shift+R [Win]/Ctrl+F5 [Win]/Cmd+Shift+R [Mac]; note the keyboard shortcut doesn't work on Safari)
• In AES67 mode - Audio does not pass after changing Dante Device name, followed by reboot

Notes

• User Guide
• Command Strings
• This version of ANIUSB-MATRIX is compatible with ANIUSB-MATRIX devices running older firmware versions, but updating all devices used together to the same firmware version is recommended.
• To operate this version of ANIUSB-MATRIX with Dante Controller, reference the following minimum versions
  • v3.10.2.4 (Windows)
  • v3.10.2.3 (macOS)
• To operate this version of ANIUSB-MATRIX with Microsoft Teams, reference the following minimum versions:
  • Microsoft Teams Desktop: 1.3.00.24755
  • Microsoft Teams Rooms: 4.6.20.0
• To operate this version of ANIUSB-MATRIX with Shure software or other Shure networked systems, reference the following list of minimum versions supported:
  • Designer 4.6.0
  • ANI22/ANI4IN/ANI4OUT 4.6.6
  • MXA310 4.6.3
  • MXA910 4.6.6
  • Microflex Wireless 9.0.4
  • P300 4.6.6
  • ULXD4D/4Q 2.5.0
  • SCM820 1.4.3
  • Shure Update Utility 2.6.1
  • Shure Web Device Discovery 1.2.17

New Features 

• Services – ability to configure network services

Known Issues 

• Pop noise is triggered when the channel is unrouted in Dante controller with encryption enabled
• When exporting Presets using Safari on a Mac OS, the file type is saved incorrectly and must be renamed to .json to be imported.
• Shure Audio Encryption is not backwards compatible; all devices must be on version 4.1 firmware or newer to use this feature
• When attempting to load the device’s web page after using SUU to upgrade or downgrade between MXA 4.3 and earlier releases, the browser may appear to be stuck on the “Loading” screen with the progress bar continually moving. This will typically happen if two upgrades or downgrades are performed within a one-hour period.
  • Workaround: hold your Shift key and click the Refresh button in your browser (or press Ctrl+Shift+R [Win]/Ctrl+F5 [Win]/Cmd+Shift+R [Mac]; note the keyboard shortcut doesn't work on Safari)
• In AES67 mode - Audio does not pass after changing Dante Device name, followed by reboot

Notes 

• User Guide
• Command Strings
• This version of ANIUSB-MATRIX is compatible with ANIUSB-MATRIX devices running older firmware versions, but updating all devices used together to the same firmware version is recommended.
• To operate this version of ANIUSB-MATRIX with Dante Controller, reference the following minimum versions
  • v3.10.2.4 (Windows)
  • v3.10.2.3 (macOS)
• To operate this version of ANIUSB-MATRIX with Microsoft Teams, reference the following minimum versions:
  • Microsoft Teams Desktop: 1.3.00.24755
  • Microsoft Teams Rooms: 4.6.20.0
• To operate this version of ANIUSB-MATRIX with Shure software or other Shure networked systems, reference the following list of minimum versions supported:
  • Designer 4.5.0
  • ANI22/ANI4IN/ANI4OUT 4.5.22
  • MXA310 4.5.8
  • MXA910 4.5.8
  • Microflex Wireless 9.0.4
  • P300 4.5.13
  • ULXD4D/4Q 2.5.0
  • SCM820 1.4.3
  • Shure Update Utility 2.6.1
  • Shure Web Device Discovery 1.2.9

New Features

• Call Status support – Changes the microphones LED state to notify the user when the room is in a call (off hook-LEDs on) or out of a call (on hook-LEDs off). This feature requires Logic and Call status enabled and connection to a supported USB codec. This setting is disabled by default.
• Device Type – Informs USB-connected codecs that the ANIUSB has AEC (acoustic echo cancellation) in the signal path. The user or codec* can then enable or disable the AEC on the codec.
  *Codec must support AEC disable for ANIUSB or have manual disable.
  • Speakerphone: Use for microphones without DSP (MXA310), or when the codec handles DSP.
  • Echo-canceling speakerphone: Use when microphones have IntelliMix DSP with AEC enabled (MXA710 or MXA910) or when the codec DSP is not needed.
  • Designer’s Optimize workflow chooses the correct setting for USB device type
  • USB device type changes take 3-4 seconds and audio drops out briefly. Do not change other settings while this takes effect.
  • Select the ANIUSB as the default audio device in the codec after making changes.

Known Issues

• Pop noise is triggered when the channel is unrouted in Dante controller with encryption enabled
• When exporting Presets using Safari on a Mac OS, the file type is saved incorrectly and must be renamed to .json to be imported.
• When attempting to load the device’s web page after using SUU to upgrade or downgrade between MXA 4.3 and earlier releases, the browser may appear to be stuck on the “Loading” screen with the progress bar continually moving. This will typically happen if two upgrades or downgrades are performed within a one-hour period. To correct this, hold your Shift key and click the Refresh button in your browser (or press Ctrl+Shift+R [Win]/Ctrl+F5 [Win]/Cmd+Shift+R [Mac]; note the keyboard shortcut doesn't work on Safari)
• Shure Audio Encryption is not backwards compatible; all devices must be on version 4.1 firmware or newer to use this feature
• ANI22/ANI4 - In AES67 mode - Audio does not pass after changing Dante Device name, followed by reboot
• ANI22-XLR reverses absolute phase from Analog in to Dante out – workaround is to enable “Invert polarity” for Dante Output

Notes

• User Guide
• Command Strings
• ANIUSB-MATRIX version 4.4.14 is compatible with ANIUSB-MATRIX devices running older firmware versions, but updating all devices used together to the same firmware version is recommended.
• To operate ANIUSB-MATRIX version 4.4.14 with Dante Controller, reference the following minimum versions: v3.10.2.4 (Windows) and v3.10.2.3 (macOS)
• To operate ANIUSB-MATRIX 4.4.14 with Microsoft Teams, reference the following minimum versions:
  • Microsoft Teams Desktop: 1.3.00.24755
  • Microsoft Teams Rooms: 4.6.20.0
• To operate ANIUSB-MATRIX version 4.4.14 with Shure software or other Shure networked systems, reference the following list of minimum versions supported:
  • Shure Designer 4.3.0
  • ANI22 4.4.8
  • ANI4IN 4.4.8
  • ANI4OUT 4.4.8
  • MXA310 4.4.9
  • MXA910 4.4.11
  • Microflex Wireless 8.0.3
  • P300 4.4.13
  • ULXD4D/4Q 2.4.25
  • SCM820 1.3.3
  • Shure Update Utility 2.5.1
  • Shure Web Device Discovery 1.2.9

Improvements

• USB Audio and Mute sync improvements
  • Improved performance with USB extending
  • Chrome OS Audio support
  • Mute sync improvements - Microsoft Teams, Zoom, and Skype for Business

Bug Fixes

• Fixed an issue with Barco ClickShare CX50, where the ANIUSB-MATRIX was recognized but no audio was passed
• Additional bug fixes and enhancements

Known Issues

• Pop noise is triggered when the channel is unrouted in Dante controller
• When exporting Presets using Safari on a Mac OS, the file type is saved incorrectly and must be renamed to .json to be imported.
• When attempting to load the device’s web page after using SUU to upgrade or downgrade between MXA 4.3 and earlier releases, the browser may appear to be stuck on the “Loading” screen with the progress bar continually moving. This will typically happen if two upgrades or downgrades are performed within a one-hour period. To correct this, hold your Shift key and click the Refresh button in your browser (or press Ctrl+Shift+R [Win]/Ctrl+F5 [Win]/Cmd+Shift+R [Mac]; note the keyboard shortcut doesn't work on Safari)
• Shure Audio Encryption is not backwards compatible; all devices must be on version 4.1 firmware or newer to use this feature

Notes

• User Guide
• Command Strings
• ANIUSB-MATRIX version 4.3.11 is compatible with ANIUSB-MATRIX devices running older firmware versions, but updating all devices used together to the same firmware version is recommended.
• To operate ANIUSB-MATRIX version 4.3.11 with Dante Controller, reference the following minimum versions: v3.10.2.4 (Windows) and v3.10.2.3 (macOS)
• To operate ANIUSB-MATRIX 4.3.11 with Microsoft Teams, reference the following minimum versions:
  • Microsoft Teams Desktop: 1.3.00.24755
  • Microsoft Teams Rooms: 4.6.20.0
• To operate ANIUSB-MATRIX version 4.3.11 with Shure software or other Shure networked systems, reference the following list of minimum versions supported:
  • Shure Designer 4.3.0
  • ANI22 4.3.7
  • ANI4IN 4.3.7
  • ANI4OUT 4.3.7
  • MXA310 4.3.6
  • MXA910 4.3.2
  • Microflex Wireless 8.0.3
  • P300 4.3.7
  • ULXD4D/4Q 2.4.9
  • SCM820 1.3.3
  • Shure Update Utility 2.5.0
  • Shure Web Device Discovery 1.2.9

Improvement

• USB compatibility upgrade

Known Issues

• Pop noise is triggered when the channel is unrouted in Dante controller
• Factory reset occasionally fails to reset Dante settings and/or fully disable encryption. Solution: Reboot the device if unable to route audio after factory reset.
• TCPI set 0 for input level switch also incorrectly changes the output level switch and vice versa
• When exporting Presets using Safari on a Mac OS, the file type is saved incorrectly and must be renamed to .json to be imported.
• When attempting to load the device’s web page after using SUU to upgrade or downgrade between MXA 4.2 and earlier releases, the browser may appear to be stuck on the “Loading” screen with the progress bar continually moving. This will typically happen if two upgrades or downgrades are performed within a one-hour period. To correct this, hold your Shift key and click the Refresh button in your browser (or press Ctrl+Shift+R [Win]/Ctrl+F5 [Win]/Cmd+Shift+R [Mac]; note the keyboard shortcut doesn't work on Safari)
• USB Output audio may be distorted by the host PC when using some USB extenders
• Shure Audio Encryption is not backwards compatible; all devices must be on version 4.1 firmware or newer to use this feature
• Shure Update Utility and Designer may not allow downgrading of some ANIUSBs due to USB improvements

Notes

• User Guide
• Command Strings
• ANIUSB-MATRIX version 4.2.23 is compatible with ANIUSB-MATRIX devices running version 4.2.23 and below, but updating all devices used together to the same firmware version is recommended.
• To operate ANIUSB-MATRIX version 4.2.23 with Dante Controller, reference the following minimum versions: v3.10.2.4 (Windows) and v3.10.2.3 (macOS)
• To operate ANIUSB-MATRIX version 4.2.23 with Shure software or other Shure networked systems, reference the following list of minimum versions supported:
  • Shure Designer 4.2
  • ANI22 4.2.18
  • ANI4IN 4.2.18
  • ANI4OUT 4.2.18
  • MXA310 4.2.18
  • MXA910 4.2.18
  • Microflex Wireless 8.0.3
  • P300 4.2.7
  • ULXD4D/4Q 2.4.9
  • SCM820 1.3.3
  • Shure Update Utility 2.4.8
  • Shure Web Device Discovery 1.2.9

New Features

• Designer
  • New Room Optimization for faster system configuration
  • Device Presets

Improvements

• USB
  • Mute Sync improvements – Zoom and Microsoft Teams
  • Chrome OS audio support

Known Issues

• Pop noise is triggered when the channel is unrouted in Dante controller
• Factory reset occasionally fails to reset Dante settings and/or fully disable encryption. Solution: Reboot the device if unable to route audio after factory reset
• TCPI set 0 for input level switch also incorrectly changes the output level switch and vice versa
• When exporting Presets using Safari on a Mac OS, the file type is saved incorrectly and must be renamed to .json to be imported.
• When attempting to load the device’s web page after using SUU to upgrade or downgrade between MXA 3.1 and earlier releases, the browser may appear to be stuck on the “Loading” screen with the progress bar continually moving. This will typically happen if two upgrades or downgrades are performed within a one-hour period. To correct this, hold your Shift key and click the Refresh button in your browser (or press Ctrl+Shift+R [Win]/Ctrl+F5 [Win]/Cmd+Shift+R [Mac]; note the keyboard shortcut doesn't work on Safari).
• Shure Audio Encryption is not backwards compatible; all devices must be on version 4.1 firmware or newer to use this feature

Notes

• User Guide
• Command Strings
• ANIUSB-MATRIX version 4.2.19 is compatible with ANIUSB-MATRIX devices running version 4.2.19 and below, but updating all devices used together to the same firmware version is recommended.
• To operate ANIUSB-MATRIX version 4.2.19 with Dante Controller, reference the following minimum versions: v3.10.2.4 (Windows) and v3.10.2.3 (macOS)
• To operate ANIUSB-MATRIX version 4.2.19 with Shure software or other Shure networked systems, reference the following list of minimum versions supported:
  • Shure Designer 4.2
  • ANI22 4.2.18
  • ANI4IN 4.2.18
  • ANI4OUT 4.2.18
  • MXA310 4.2.18
  • MXA910 4.2.18
  • Microflex Wireless 8.0.3
  • P300 4.2.4
  • ULXD4D/4Q 2.4.9
  • SCM820 1.3.3
  • Shure Update Utility 2.4.8
  • Shure Web Device Discovery 1.2.9

新功能

• 支持Dante Domain Manager
• 支持Dante Device Lock
• 支持AES67
• USB静音同步
• 逻辑静音控制
• P300和ANIUSB-MATRIX的组件用户界面（Web UI）功能将减少，仅支持网络和设备设置基本故障排除。Designer 3.2仍可下载以支持旧版3.1.x和4.0.12版本设备。
  
  说明：请确保现场技术人员和使用这些设备提供现场支持的任何人员，都可以下载并安装最新版本的Designer。若无Designer的支持，设备配置和优化功能将极其有限。

改进

• 新TPCI命令
• 为增强安全性，首次访问用户界面时将提示用户设置密码。用户可以选择不设置密码继续运行，让舒尔Designer配置软件在某一位置内能够安全地配置设备
  • 密码长度必须至少8个字符，最多64个字符，所有字符均可接受
  • 首次登陆后可禁用密码
  • 降级警告：
    • 升级4.1.37版本后，设备的新密码（和/或其它音频加密密码）可能超过其先前固件版本允许的长度。在这种情况下降级，需要执行以下过程以确保密码的兼容性：
      • 降级前，请登录并禁用密码，或将密码更改为先前固件允许的字符长度
      • 执行固件降级；根据需要启用密码
  • 使用Designer软件：
• 使用舒尔Designer软件将多个具有不同固件级别的设备应用于某个位置时，这些设备的位置密码必须遵守原固件的长度和字符集限制。建议将该位置的所有设备更新为最新固件，以使用防护级别更高的密码

问题修复

• 修复了使用静态IP设置重启后，音频可能会丢失的问题
• 其它问题修复

已知问题

• 如将输入电平开关的TCPI设置为0，也会错误地改变输出电平开关，反之亦然
• 在Mac OS上使用Safari导出预设时，会出现文件类型保存不正确的情况，必须将其重命名为.json才能导入
• 使用SUU在MXA 3.1和早期版本之间进行升级或降级后，尝试加载设备的网页时，浏览器可能停留在“正在加载”状态且进度条不断移动。如果在一小时内执行两次升级或降级，通常会出现上述情况。若要更正此问题，请按住Shift键，并在浏览器中单击“刷新”按钮（或按Ctrl + Shift + R [Win] / Ctrl + F5 [Win] / Cmd + Shift + R [Mac]；请注意键盘快捷键无法在Safari上使用）
• 舒尔网络音频加密不向后兼容；所有设备都必须使用4.1版本固件才能应用此功能

说明

• 用户手册
• 命令字符串
• ANIUSB-MATRIX 4.1.39版本与运行4.1.39及以下版本的ANIUSB-MATRIX设备兼容，但仍建议将所有一起使用的设备更新为相同的固件版本
• 要使用Dante Controller操作ANIUSB-MATRIX 版本 4.1.39，请参考以下最低版本：v3.10.2.4（Windows）和v3.10.2.3（Mac OS X）
• 要使用舒尔软件或其它舒尔联网系统上运行ANIUSB-MATRIX 版本4.1.39，请参考以下支持的最低版本列表：
  • 舒尔Shure Designer 版本 4.1
  • 舒尔SystemOn 版本 3.2
  • ANI22 版本 4.1.39
  • ANI4IN 版本 4.1.39
  • ANI4OUT 版本 4.1.39
  • MXA310 版本 4.1.37
  • MXA910 版本 4.1.41
  • Microflex Wireless 版本 8.0.3
  • P300 版本 4.1.11
  • ULXD4D/4Q 版本 2.4.9
  • SCM820 版本 1.3.3
  • 舒尔Update Utility 版本 2.4.6
  • 舒尔Web Device Discovery 版本 1.2.5

Recommendation

Update all Audio Network Interfaces in a configuration to the newest firmware versions.

Improvement

• Fix for web server performance issues

Known Issues

• There is the potential for a loss of audio after a power cycle when using Static IP setting: Un-checking and re-checking the Dante connections is necessary to reestablish audio between devices. An Alternative fix is to use DHCP addressing.
• TCPI set 0 for input level switch also incorrectly changes the output level switch and vice versa.
• When exporting Presets using Safari on a Mac OS, the file type is saved incorrectly and must be renamed to .json to be imported.
• When attempting to load the device’s web page after using SUU to upgrade or downgrade between MXA 3.1 and earlier releases, the browser may appear to be stuck on the “Loading” screen with the progress bar continually moving. This will typically happen if two upgrades or downgrades are performed within a one-hour period. To correct this, hold your Shift key and click the Refresh button in your browser (or press Ctrl+Shift+R [Win]/Ctrl+F5 [Win]/Cmd+Shift+R [Mac]; note the keyboard shortcut doesn't work on Safari).

Notes

• User Guide
• Command Strings
• ANIUSB-MATRIX version 3.1.6 is compatible with ANIUSB-MATRIX devices running version 3.1.6 and below, but updating all devices used together to the same firmware version is recommended.
• To operate ANIUSB-MATRIX version 3.1.6 with Dante Controller, reference the following minimum versions: v3.10.2.4 (Windows) and v3.10.2.3 (macOS)
• To operate ANIUSB-MATRIX version 3.1.6 with Shure software or other Shure networked systems, reference the following list of minimum versions supported:
  • Shure Designer 3.2
  • Shure SystemOn 3.2
  • ANI22 2.0.18
  • ANI4IN 2.0.18
  • ANI4OUT 2.0.18
  • MXA310 3.1.6
  • MXA910 4.0.12
  • Microflex Wireless 6.0.3
  • P300 3.1.6
  • ULXD4D/4Q 2.3.34
  • SCM820 1.3.3
  • Shure Update Utility 2.4.4
  • Shure Web Device Discovery 1.2.5

Recommendation

Update all Audio Network Interfaces in a configuration to the same firmware version.

Improvements

• Compatibility with Designer 3.1 System Configuration Software
• Hardware LED Metering and Clip Improvements
• USB Audio Plug and play improvements
• Network stability enhancements
• Bug fixes

Known Issues

• TCPI set 0 for input level switch also incorrectly changes the output level switch and vice versa.
• When exporting Presets using Safari on a Mac OS, the file type is saved incorrectly and must be renamed to .json to be imported
• When attempting to load the device’s web page after using SUU to upgrade or downgrade between MXA 3.1 and earlier releases, the browser may appear to be stuck on the “Loading” screen with the progress bar continually moving. This will typically happen if two upgrades or downgrades are performed within a one-hour period. To correct this, hold your Shift key and click the Refresh button in your browser (or press Ctrl+Shift+R [Win]/Ctrl+F5 [Win]/Cmd+Shift+R [Mac]; note the keyboard shortcut doesn't work on Safari).

Notes

• User Guide
• Command Strings
• ANIUSB-MATRIX version 3.1.5 is compatible with ANIUSB-MATRIX devices running version 2.0.18 and below, but updating all devices used together to the same firmware version is recommended.
• To operate ANIUSB-MATRIX version 3.1.5 with Dante Controller, reference the following minimum versions: v3.10.2.4 (Windows) and v3.10.2.3 (macOS)
• To operate ANIUSB-MATRIX version 2.0.19 with other Shure networked systems, reference the following list of minimum versions supported:
  • ANI22 2.0.18
  • ANI4IN 2.0.18
  • ANI4OUT 2.0.18
  • MXA310 3.1.5
  • MXA910 3.1.5
  • Microflex Wireless 6.0.3
  • P300 3.1.5
  • ULXD4D/4Q 2.2.23
  • SCM820 1.3.3
  • Shure Update Utility 2.4.3
  • Shure Web Device Discovery 1.2.5

Improvement

• Reduces the loading time over VPN for the web-based graphical user interface (GUI)

Known Issue

• TCPI set 0 for input level switch also incorrectly changes the output level switch and vice versa.
• When exporting Presets using Safari on a Mac OS, the file type is saved incorrectly and must be renamed to .json to be imported.

Notes

• User Guide
• ANIUSB-MATRIX version 2.0.19 is compatible with ANIUSB-MATRIX devices running version 2.0.18 and below, but updating all devices used together to the same firmware version is recommended.
• To operate ANIUSB-MATRIX version 2.0.19 with Dante Controller, reference the following minimum versions: v3.10.2.4 (Windows) and v3.10.2.3 (Mac OS X)
• To operate ANIUSB-MATRIX version 2.0.19 with other Shure networked systems, reference the following list of minimum versions supported:
  • ANI22 2.0.18
  • ANI4IN 2.0.18
  • ANI4OUT 2.0.18
  • MXA310 2.0.19
  • MXA910 2.0.19
  • Microflex Wireless 5.1.26
  • ULXD4D/4Q 2.1.16
  • SCM820 1.3.3
  • Shure Update Utility 2.4.1
  • Shure Web Device Discovery 1.1

New Feature

• Initial firmware for ANIUSB-MATRIX

Notes

• To operate ANIUSB-MATRIX version 2.0.11 with Dante Controller, reference the following minimum versions: v3.10.2.4 (Windows) and v3.10.2.3 (Mac OS X)
• To operate ANIUSB-MATRIX version 2.0.11 with other Shure networked systems, reference the following list of minimum versions supported:
  • ANI4IN 2.0.7
  • ANI4OUT 2.0.8
  • MXA310 2.0.7
  • MXA910 2.0.8
  • Microflex Wireless 5.1.23
  • SCM820 1.3.3
  • Shure Update Utility 2.4
  • Shure Web Device Discovery 1.1