固件

ANI22 - Audio Network Interface

所有版本

发布日期

下载

6.0.41
2024年2月29日
使用SUU下载 open_in_new

Improvements

  • Enhancements to support Designer 6.0.0
  • Additional hardware support

Known Issues

  • Security Certificates:
    • Certificates must be in the PEM (Privacy Enhanced Mail) format
    • Certificates must be X.509 certificates and keys: PEM (Base64 ASCII), and DER (binary)
  • The CUI may become unresponsive after a firmware update
    • Workaround: Try clearing the cache on your browser to re-assert the connection.  Please check your web browser for instructions on how to clear the browser cache. A common method of clearing the cache of a browser is Ctrl SHIFT R .
  • Browser disconnection: Web browsers connected to our devices maybe disconnected after one hour if no user activity is detected.  Refresh the browser to re-establish the connection.
  • In AES67 mode - Audio does not pass after changing Dante Device name, followed by a reboot
  • ANI22-XLR reverses absolute phase from Analog in to Dante out – workaround is to enable “Invert polarity” for Dante Output
  • When exporting Presets using Safari on a Mac OS, the file type is saved incorrectly and must be renamed to .json to be imported

Notes

  • User Guide
  • Command Strings
  • To operate this version of ANI22 with Dante Controller, reference the following minimum versions:
    • v3.10.2.4 (Windows)
    • v3.10.2.3 (macOS)
  • Updating all devices used together to the same firmware version is recommended.
  • To operate this version of ANI22 with other Shure networked systems, reference the following list of recommended versions supported:
    • ANI22/ANI4IN/ANI4OUT 6.0.41
    • ANIUSB 6.0.44
    • MXA310 6.0.23
    • MXA910 6.0.24
    • MXA920 6.0.38
    • MXA901 6.0.39
    • MXA902 6.0.32
    • MXW 10.0.X
    • ULXD4D/4Q 2.8.7
    • SCM820 1.4.3
    • Shure Update Utility 2.8.4
    • Shure Web Device Discovery 1.2.17
4.7.6
2022年6月1日
使用SUU下载 open_in_new

Improvements

  • Bug fixes

Known Issues

  • In AES67 mode - Audio does not pass after changing Dante Device name, followed by a reboot
  • ANI22-XLR reverses absolute phase from Analog in to Dante out – workaround is to enable “Invert polarity” for Dante Output
  • When exporting Presets using Safari on a Mac OS, the file type is saved incorrectly and must be renamed to .json to be imported
  • Shure Audio Encryption is not backward compatible; all devices must be on version 4.1 firmware to use this feature
  • When attempting to load the device’s web page after using SUU to upgrade or downgrade between MXA 4.3 and earlier releases, the browser may appear to be stuck on the “Loading” screen with the progress bar continually moving.
    • Workaround: hold your Shift key and click the Refresh button in your browser (or press Ctrl+Shift+R [Win]/Ctrl+F5 [Win]/Cmd+Shift+R [Mac]; note the keyboard shortcut doesn't work on Safari)

Notes

  • User Guide
  • Command Strings
  • To operate this version of ANI22 with Dante Controller, reference the following minimum versions:
    • v3.10.2.4 (Windows)
    • v3.10.2.3 (macOS)
  • Updating all devices used together to the same firmware version is recommended.
  • To operate this version of ANI22 with other Shure networked systems, reference the following list of recommended versions supported:
    • ANI4IN 4.7.6
    • ANI4OUT 4.7.6
    • ANIUSB-MATRIX 4.7.16
    • MXA310 4.7.8
    • MXA910 4.7.13
    • Microflex Wireless 10.0.6
    • ULXD4D/4Q 2.6.3
    • SCM820 1.4.3
    • Shure Update Utility 2.7.1
    • Shure Web Device Discovery 1.2.17
4.6.6
2021年11月5日
使用SUU下载 open_in_new

Improvements

  • Bug fixes

Known Issues

  • In AES67 mode - Audio does not pass after changing Dante Device name, followed by reboot
  • ANI22-XLR reverses absolute phase from Analog in to Dante out – workaround is to enable “Invert polarity” for Dante Output
  • When exporting Presets using Safari on a Mac OS, the file type is saved incorrectly and must be renamed to .json to be imported
  • Shure Audio Encryption is not backwards compatible; all devices must be on version 4.1 firmware to use this feature
  • When attempting to load the device’s web page after using SUU to upgrade or downgrade between MXA 4.3 and earlier releases, the browser may appear to be stuck on the “Loading” screen with the progress bar continually moving. This will typically happen if two upgrades or downgrades are performed within a one-hour period.
    • Workaround: hold your Shift key and click the Refresh button in your browser (or press Ctrl+Shift+R [Win]/Ctrl+F5 [Win]/Cmd+Shift+R [Mac]; note the keyboard shortcut doesn't work on Safari)

Notes

  • User Guide
  • Command Strings
  • This version of ANI22 is compatible with ANI22 devices running older firmware versions, but updating all devices used together to the same firmware version is recommended.
  • To operate this version of ANI22 with Dante Controller, reference the following minimum versions:
    • v3.10.2.4 (Windows)
    • v3.10.2.3 (macOS)
  • To operate this version of ANI22 with other Shure networked systems, reference the following list of minimum versions supported:
    • ANI4IN 4.6.6
    • ANI4OUT 4.6.6
    • ANIUSB-MATRIX 4.6.7
    • MXA310 4.6.3
    • MXA910 4.6.6
    • Microflex Wireless 9.0.4
    • ULXD4D/4Q 2.5.0
    • SCM820 1.4.3
    • Shure Update Utility 2.6.1
    • Shure Web Device Discovery 1.2.17
4.5.22
2021年9月15日
联系我们 open_in_new

New Features 

  • Services – ability to configure network services

Improvements 

  • Bug fixes

Known Issues 

  • In AES67 mode - Audio does not pass after changing Dante Device name, followed by reboot
  • ANI22-XLR reverses absolute phase from Analog in to Dante out – workaround is to enable “Invert polarity” for Dante Output
  • When exporting Presets using Safari on a Mac OS, the file type is saved incorrectly and must be renamed to .json to be imported
  • Shure Audio Encryption is not backwards compatible; all devices must be on version 4.1 firmware to use this feature
  • When attempting to load the device’s web page after using SUU to upgrade or downgrade between MXA 4.3 and earlier releases, the browser may appear to be stuck on the “Loading” screen with the progress bar continually moving. This will typically happen if two upgrades or downgrades are performed within a one-hour period.
    • Workaround: hold your Shift key and click the Refresh button in your browser (or press Ctrl+Shift+R [Win]/Ctrl+F5 [Win]/Cmd+Shift+R [Mac]; note the keyboard shortcut doesn't work on Safari)

Notes 

  • User Guide
  • Command Strings
  • This version of ANI22 is compatible with ANI22 devices running older firmware versions, but updating all devices used together to the same firmware version is recommended.
  • To operate this version of ANI22 with Dante Controller, reference the following minimum versions:
    • v3.10.2.4 (Windows)
    • v3.10.2.3 (macOS)
  • To operate this version of ANI22 with other Shure networked systems, reference the following list of minimum versions supported:
    • ANI4IN 4.5.22
    • ANI4OUT 4.5.22
    • ANIUSB-MATRIX 4.5.23
    • MXA310 4.5.8
    • MXA910 4.5.8
    • Microflex Wireless 9.0.4
    • ULXD4D/4Q 2.5.0
    • SCM820 1.4.3
    • Shure Update Utility 2.6.1
    • Shure Web Device Discovery 1.2.9
4.4.8
2021年2月23日
联系我们 open_in_new

Improvements

  • Bug fixes

Known Issues

  • When exporting Presets using Safari on a Mac OS, the file type is saved incorrectly and must be renamed to .json to be imported
  • Shure Audio Encryption is not backwards compatible; all devices must be on version 4.1 firmware to use this feature

Notes

  • User Guide
  • Command Strings
  • ANI22 version 4.4.8 is compatible with ANI22 devices running older firmware versions, but updating all devices used together to the same firmware version is recommended.
  • To operate ANI22 version 4.4.8 with Dante Controller, reference the following minimum versions: v3.10.2.4 (Windows) and v3.10.2.3 (macOS)
  • To operate ANI22 version 4.4.8 with other Shure networked systems, reference the following list of minimum versions supported:
    • ANI4IN 4.4.8
    • ANI4OUT 4.4.8
    • ANIUSB-MATRIX 4.4.14
    • MXA310 4.4.9
    • MXA910 4.4.11
    • Microflex Wireless 8.0.3
    • ULXD4D/4Q 2.4.25
    • SCM820 1.3.3
    • Shure Update Utility 2.5.1
    • Shure Web Device Discovery 1.2.9
4.3.7
2020年11月23日
联系我们 open_in_new

Improvements

  • Bug fixes

Known Issues

  • When exporting Presets using Safari on a Mac OS, the file type is saved incorrectly and must be renamed to .json to be imported
  • Shure Audio Encryption is not backwards compatible; all devices must be on version 4.1 firmware to use this feature

Notes

  • User Guide
  • Command Strings
  • ANI22 version 4.3.7 is compatible with ANI22 devices running older firmware versions, but updating all devices used together to the same firmware version is recommended.
  • To operate ANI22 version 4.1.39 with Dante Controller, reference the following minimum versions: v3.10.2.4 (Windows) and v3.10.2.3 (macOS)
  • To operate ANI22 version 4.3.7 with other Shure networked systems, reference the following list of minimum versions supported:
    • ANI4IN 4.3.7
    • ANI4OUT 4.3.7
    • ANIUSB-MATRIX 4.3.11
    • MXA310 4.3.6
    • MXA910 4.3.2
    • Microflex Wireless 8.0.3
    • ULXD4D/4Q 2.4.9
    • SCM820 1.3.3
    • Shure Update Utility 2.5.0
    • Shure Web Device Discovery 1.2.9
4.2.18
2020年7月22日
联系我们 open_in_new

Improvement

  • Logic improvement

Bug Fixes

  • Removed Logic Inverter option. Fixed an issue where there was the potential for a loss of audio after a power cycle when using Static IP setting.
  • Failure to clear the encryption key when encryption is disabled

Known Issues

  • Factory reset occasionally fails to reset Dante settings and/or fully disable encryption. Solution: Reboot the device if unable to route audio after factory reset
  • When exporting Presets using Safari on a Mac OS, the file type is saved incorrectly and must be renamed to .json to be imported
  • Shure Audio Encryption is not backwards compatible; all devices must be on version 4.1 firmware to use this feature

Notes

  • User Guide
  • Command Strings
  • ANI22 version 4.2.18 is compatible with ANI22 devices running version 4.2.18 and below, but updating all devices used together to the same firmware version is recommended.
  • To operate ANI22 version 4.2.18 with Dante Controller, reference the following minimum versions: v3.10.2.4 (Windows) and v3.10.2.3 (macOS)
  • To operate ANI22 version 4.2.18 with other Shure networked systems, reference the following list of minimum versions supported:
    • ANI4IN 4.2.18
    • ANI4OUT 4.2.18
    • ANIUSB-MATRIX 4.2.19
    • MXA310 4.2.18
    • MXA910 4.2.18
    • P300 4.2.4
    • Microflex Wireless 8.0.3
    • ULXD4D/4Q 2.4.9
    • SCM820 1.3.3
    • Shure Update Utility 2.4.8
    • Shure Web Device Discovery 1.2.9
4.1.39
2020年2月11日
联系我们 open_in_new

新功能

  • 支持Dante Domain Manager
  • 支持Dante Device Lock
  • 支持AES67

改进

  • 为增强安全性，首次访问用户界面时将提示用户设置密码。用户可以选择不设置密码继续运行，让舒尔Designer配置软件在某一位置内能够安全地配置设备
    • 密码长度必须至少8个字符，最多64个字符，所有字符均可接受
    • 首次登陆后可禁用密码
    • 降级警告
      • 升级4.1.37版本后，设备的新密码（和/或其它音频加密密码）可能超过其它先前固件版本允许的长度。在这种情况下降级，需要执行以下过程以确保密码的兼容性：
        • 降级前，请登录并禁用密码，或将密码更改为先前固件允许的字符长度
        • 执行固件降级；根据需要启用密码
    • 使用Designer软件：
  • 使用舒尔Designer软件将多个具有不同固件级别的设备应用于某个位置时，这些设备的位置密码必须遵守原固件的长度和字符集限制。建议将该位置的所有设备更新为最新固件，以使用防护级别更高的密码。

问题修复

  • 修复了使用静态IP设置重启后，音频可能会丢失的问题

已知问题

  • 在Mac OS上使用Safari导出预设时，会出现文件类型保存不正确的情况，必须将其重命名为.json才能导入。
  • 舒尔网络音频加密不向后兼容；所有设备都必须使用4.1版本固件才能应用此功能。

说明

  • 用户指南
  • 命令字符串
  • ANI22 4.1.39版本与运行4.1.39及以下版本的ANI22设备兼容，但仍建议将所有一起使用的设备更新为相同的固件版本
  • 要使用Dante Controller操作ANI22版本 4.1.39，请参考以下最低版本：v3.10.2.4（Windows）和v3.10.2.3（Mac OS X）
  • 要使用舒尔软件或其它舒尔联网系统上运行ANI22版本4.1.39，请参考以下支持的最低版本列表：
    • ANI4IN 版本 4.1.39
    • ANI4OUT 版本 4.1.39
    • ANIUSB-MATRIX 版本 4.1.39
    • MXA310 版本 4.1.37
    • MXA910 版本 4.1.41
    • Microflex Wireless 版本 8.0.3
    • ULXD4D/4Q 版本 2.4.9
    • SCM820 版本 1.3.3
    • Shure Update Utility 版本 2.4.6
    • Shure Web Device Discovery 版本 1.2.5
2.0.18
2017年12月18日
联系我们 open_in_new

Improvement

  • Reduces the loading time over VPN for the web-based graphical user interface (GUI)

Known Issue

  • When exporting Presets using Safari on a Mac OS, the file type is saved incorrectly and must be renamed to .json to be imported

Notes

  • User Guide
  • ANI22 version 2.0.18 is compatible with ANI22 devices running version 2.0.18 and below, but updating all devices used together to the same firmware version is recommended.
  • To operate ANI22 version 2.0.18 with Dante Controller, reference the following minimum versions: v3.10.2.4 (Windows) and v3.10.2.3 (Mac OS X)
  • To operate ANI22 version 2.0.18 with other Shure networked systems, reference the following list of minimum versions supported:
    • ANI4IN 2.0.18
    • ANI4OUT 2.0.18
    • ANIUSB-MATRIX 2.0.19
    • MXA310 2.0.19
    • MXA910 2.0.19
    • Microflex Wireless 5.1.26
    • ULXD4D/4Q 2.1.16
    • SCM820 1.3.3
    • Shure Update Utility 2.4.1
    • Shure Web Device Discovery 1.1
2.0.11
2017年8月31日
联系我们 open_in_new

New Features

  • Initial firmware for ANI22

Notes

  • To operate ANI22 version 2.0.11 with Dante Controller, reference the following minimum versions: v3.10.2.4 (Windows) and v3.10.2.3 (Mac OS X)
  • To operate ANI22 version 2.0.11 with other Shure networked systems, reference the following list of minimum versions supported:
    • ANI4IN 2.0.7
    • ANI4OUT 2.0.8
    • MXA310 2.0.7
    • MXA910 2.0.8
    • Microflex Wireless 5.1.23
    • SCM820 1.3.3
    • Shure Update Utility 2.4
    • Shure Web Device Discovery 1.1

相关联产品

ANI22

ANI22

将2个线路/话筒信号输入或输出Dante™网络。