Firmware

ULXD1/2 - Wireless Transmitter

Versions

Date Posted

Download

2.8.6
December 12, 2023

Improvements

  • Support for added hardware revisions

Notes

  • User Guide
  • Information about the hardware revision is displayed in the UTILITY > VERSION menu
  • To operate this version of ULX-D devices with other Shure networked systems and software, see the following list of recommended versions:
    • ULXD 2.8.6
    • Axient AXT600 Spectrum Manager 2.1.41
    • Shure Update Utility 2.8.3
    • ShurePlus Channels iOS 1.6.1
    • ShurePlus Channels Android 1.6.2
    • Wireless Workbench 6.15.4 or 7.0.0
2.7.3
October 4, 2022

Improvements

  • Support for added hardware revisions

Notes

  • User Guide
  • Information about the hardware revision is displayed in the UTILITY > VERSION menu
  • To operate this version of ULX-D devices with other Shure networked systems and software, see the following list of recommended versions:
    • ULX-D ULXD4/4D/4Q Receivers 2.7.3
    • Axient AXT600 Spectrum Manager 2.1.41
    • Shure Update Utility 2.7.2
    • ShurePlus Channels iOS 1.5.2
    • ShurePlus Channels Android 1.1.1
    • Wireless Workbench 6.15.0
2.6.3
May 24, 2022

Improvements

  • Information about the hardware revision is displayed in the UTILITY > VERSION menu

Bug Fixes

  • Temperature information is reported accurately across Shure ULX-D hardware and Shure software

Notes

  • User Guide
  • To operate this version of ULX-D devices with other Shure networked systems and software, see the following list of recommended versions:
    • ULX-D ULXD4/4D/4Q Receivers 2.6.3
    • Axient AXT600 Spectrum Manager 2.1.38
    • Wireless Workbench 6.15.0
    • ShurePlus Channels iOS 1.5.2
    • ShurePlus Channels Android 1.1.1
    • Shure Update Utility 2.7.1
2.5.0
July 1, 2021

Notes

  • User Guide
  • To operate ULX-D version 2.5.0 devices with other Shure networked systems and software, see the following list of minimum versions:
    • ULX-D ULXD4/4D/4Q Receivers 2.5.0
    • QLX-D QLXD1/2 Transmitters and QLXD4 Receivers 2.3.24
    • Axient AXT600 Spectrum Manager 2.1.38
    • Wireless Workbench 6.14.1
    • Shure Update Utility 2.6.1
    • ShurePlus Channels 1.4.6
2.4.25
February 17, 2021

Improvements

  • Add support for China 470 MHz – 510 MHz frequency band (G53)

Notes

  • User Guide
  • ULXD1/2 transmitters used with receivers must be updated via IR sync. After a receiver is updated, follow these steps:
    • Go to the receiver menu: DEVICE UTILITIES > TX FW UPDATE
    • Align the infrared ports with the transmitter
    • Press ENTER
  • To operate ULX-D version 2.4.25 devices with other Shure networked systems and software, see the following list of minimum versions:
    • ULX-D ULXD4/4D/4Q Receivers 2.4.25
    • QLX-D QLXD1/2 Transmitters and QLXD4 Receivers 2.3.24
    • Axient AXT600 Spectrum Manager 2.1.31
    • Wireless Workbench 6.14.0
    • Shure Update Utility 2.5.1
    • ShurePlus Channels 1.4.5
2.4.13
October 16, 2020

Bug Fix

  • Fixed an issue where the settings were not set correctly for transmitters operating HD mode in the Japan frequency bands

Notes

  • User Guide
  • To operate ULX-D version 2.4.13 devices with other Shure networked systems and software, see the following list of minimum versions:
    • ULX-D ULXD4/4D/4Q Receivers 2.4.9
    • QLX-D QLXD1/2 Transmitters and QLXD4 Receivers 2.3.22
    • Axient AXT600 Spectrum Manager 2.1.31
    • Wireless Workbench 6.13.3
    • Shure Update Utility 2.4.8
    • ShurePlus Channels 1.4.2
2.4.9
November 11, 2019

Improvements

  • Support for additional RF bands:
    • Thailand: 694 – 703 MHz frequency band (M19)
    • Thailand: 748 – 758 MHz frequency band (Q12)
  • Improved user interface interactions for transmitter power level
  • Improved battery runtime accuracy for 900 MHz ISM bands
  • Bug fixes

Notes

  • User Guide
  • To operate ULX-D version 2.4.9 devices with other Shure networked systems and software, see the following list of minimum versions:
    • ULX-D ULXD4/4D/4Q Receivers 2.4.9
    • QLX-D QLXD1/2 Transmitters and QLXD4 Receivers 2.3.8
    • Axient AXT600 Spectrum Manager 2.1.22
    • Wireless Workbench 6.13.1
    • Shure Update Utility 2.4.6
    • ShurePlus Channels 1.4.2
2.3.34
May 10, 2019

Important

  • New hardware revisions with the ULX-D 2.3.34 firmware version cannot be downgraded to previous firmware versions. To ensure all receivers and transmitters in a configuration function with each other, update all devices to the same firmware version.

Improvement

  • Added support for new hardware revisions.

Notes

  • User Guide
  • ULXD1/2 transmitters used with receivers must be updated via IR sync. After a receiver is updated, follow these steps:
    1. Go to the receiver menu: DEVICE UTILITIES > TX FW UPDATE
    2. Align the infrared ports with the transmitter
    3. Press ENTER
  • To operate ULX-D version 2.3.34 devices with other Shure networked systems and software, see the following list of minimum versions:
    • ULX-D ULXD4/4D/4Q Receivers 2.3.34
    • QLX-D QLXD1/2 Transmitters and QLXD4 Receivers 2.3.8
    • Axient AXT600 Spectrum Manager 2.1.22
    • Wireless Workbench  6.12.6
    • Shure Update Utility 2.4.4
    • ShurePlus Channels 1.4.2
2.3.21
February 28, 2019

Important

  • ULX-D 2.X firmware versions are incompatible with ULX-D or QLX-D 1.X firmware versions. To ensure all receivers and transmitters in a configuration function with each other, update all devices to the same firmware version.

Improvement

  • Support for Thailand 174 – 210 MHz frequency band (V52)

Known Issues

  • New hardware revisions of ULX-D version 2.3.21 are not compatible with SystemOn 2.0-3.0.1.
  • ULX-D devices on J50A or L50A frequency bands are not compatible with SystemOn 2.0-3.0.1.

Notes

  • User Guide
  • If your ULXD1/2 transmitter is on version 2.2.23, updating to version 2.2.24 will unexpectedly reset your ULXD1 to its factory default settings and your previous settings will need to be recovered via IR sync.
  • ULXD1/2 transmitters used with receivers must be updated via IR sync. After a receiver is updated, follow these steps:
    1. Go to the receiver menu: DEVICE UTILITIES > TX FW UPDATE
    2. Align the infrared ports with the transmitter
    3. Press ENTER
  • To operate ULX-D version 2.3.21 devices with other Shure networked systems and software, see the following list of minimum versions:
    • ULX-D ULXD4/4D/4Q Receivers 2.3.21
    • QLX-D QLXD1/2 Transmitters and QLXD4 Receivers 2.2.11
    • Axient AXT600 Spectrum Manager 2.1.22
    • Wireless Workbench  6.12.6
    • Shure Update Utility 2.4.3
    • ShurePlus Channels 1.4.2
2.3.4
November 7, 2018

Important

  • ULX-D 2.X firmware versions are incompatible with ULX-D or QLX-D 1.X firmware versions. To ensure all receivers and transmitters in a configuration function with each other, update all devices to the same firmware version.

Improvement

  • Changed version number to allow all ULX-D devices in a configuration to have the same firmware version.

Known Issues

  • New hardware revisions of ULX-D version 2.3.4 are not compatible with SystemOn 2.0-3.0.1.
  • ULX-D devices on J50A or L50A frequency bands are not compatible with SystemOn 2.0-3.0.1.

Notes

  • User Guide
  • If your ULXD1/2 transmitter is on version 2.2.23, updating to version 2.2.24 will unexpectedly reset your ULXD1 to its factory default settings and your previous settings will need to be recovered via IR sync.
  • ULXD1/2 transmitters used with receivers must be updated via IR sync. After a receiver is updated, follow these steps:
    1. Go to the receiver menu: DEVICE UTILITIES > TX FW UPDATE
    2. Align the infrared ports with the transmitter
    3. Press ENTER
  • To operate ULX-D version 2.3.4 devices with other Shure networked systems and software, see the following list of minimum versions:
    • ULX-D ULXD4/4D/4Q Receivers 2.3.4
    • QLX-D QLXD1/2 Transmitters and QLXD4 Receivers 2.2.11
    • Axient AXT600 Spectrum Manager 2.1.22
    • Wireless Workbench  6.12.6
    • Shure Update Utility 2.4.3
    • ShurePlus Channels 1.4.2
2.2.24
June 14, 2018

Important

  • ULX-D 2.X firmware versions are incompatible with ULX-D or QLX-D 1.X firmware versions. To ensure all receivers and transmitters in a configuration function with each other, update all devices to the same firmware version.

Improvements

  • Support for new frequency bands:
    • U.S. 572 – 616 MHz (J50A)
    • U.S. 653 – 663 MHz (L50A)
  • Bug fixes, including fixing the issue of ULXD1/2 transmitters on version 2.2.23 getting reset to factory default settings after an update or downgrade.

Known Issue

  • ULX-D devices on J50A or L50A frequency bands are not compatible with SystemOn 2.0-3.0.1

Notes

  • User Guide
  • If your ULXD1/2 transmitter is on version 2.2.23, updating to version 2.2.24 will unexpectedly reset your ULXD1 to its factory default settings and your previous settings will need to be recovered via IR sync.
  • ULXD1/2 transmitters used with receivers must be updated via IR sync. After a receiver is updated, follow these steps:
    1. Go to the receiver menu: DEVICE UTILITIES > TX FW UPDATE
    2. Align the infrared ports with the transmitter
    3. Press ENTER
  • SystemOn 3.0.1 displays "Check system requirements, your current firmware version may not be confirmed compatible" for ULX-D version 2.2.24; however only ULX-D devices on J50A or L50A frequency bands are not compatible with SystemOn 3.0.1.
  • To operate ULX-D version 2.2.24 devices with other Shure networked systems and software, see the following list of minimum versions:
    • ULX-D ULXD4/4D/4Q Receivers 2.2.24
    • QLX-D QLXD1/2 Transmitters and QLXD4 Receivers 2.2.11
    • Axient AXT600 Spectrum Manager 2.1.11
    • Wireless Workbench  6.12.4
    • Shure Update Utility 2.4.2
    • ShurePlus Channels 1.4.1
    • SystemOn 3.0.1
2.1.16
May 19, 2017

Important

  • ULX-D 2.X firmware versions are incompatible with ULX-D or QLX-D 1.X firmware versions. To ensure all receivers and transmitters in a configuration function with each other, update all devices to the same firmware version.

Improvements

  • Compatibility with new products:
    • ULXD6 Wireless Boundary Microphone Transmitter
    • ULXD8 Wireless Gooseneck Base Transmitter
    • SBC450 4-Bay Networked Charging Station
    • SBC850 8-Bay Networked Charging Station
  • New TPCI commands for charging stations, receivers, and transmitters
  • Bug fixes
    • Custom groups for AB/JB bands now correctly transfer via IR sync
    • Antenna power alert will persist until it is cleared
    • Fixed a sporadic issue of transmitter firmware updates failing

Known Issue

  • ULX-D version 2.1.16 is not compatible with SystemOn 2.1

Notes

  • ULXD1/2 transmitters used with receivers must be updated via IR sync. After a receiver is updated, follow these steps:
    1. Go to the receiver menu: DEVICE UTILITIES > TX FW UPDATE
    2. Align the infrared ports with the transmitter
    3. Press ENTER
  • To operate ULX-D devices on version 2.1.16 with other Shure networked systems and software, see the following list of minimum software versions:
2.0.28
March 2, 2017

Important

  • ULX-D 2.X firmware versions are incompatible with ULX-D or QLX-D 1.X firmware versions. To ensure all receivers and transmitters in a configuration function with each other, update all devices to the same firmware version.

Improvements

  • Improved large-scale network stability: In some cases of very large installations with earlier firmware versions, units occasionally would drop off the network and not be visible via WWB6 or other remote networking access. Version 2.0.28 resolves the issue and increases overall network stability.
  • Added new frequency bands:
    • Europe: Z17: 1492 – 1525 MHz
    • Europe: Z18: 1785 – 1805 MHz
    • Australia: Z19: 1785 – 1800 MHz
    • Taiwan
      • Z20: 1790 – 1805 MHz
      • G62: 510 – 530 MHz
  • Bug fixes

Notes

  • Update all transmitters used with receivers via IR. After the receiver is updated, follow these steps:
    1. Go to the receiver menu: DEVICE UTILITIES > TX FW UPDATE
    2. Align the infrared ports with the transmitter
    3. Press ENTER.
  • For operation of ULX-D devices with other Shure networked systems, see the following list of minimum firmware versions that are supported with ULX-D version 2.0.28:
  • ULX-D 2.0.19 (release date: 9/16/2016) is no longer available in the firmware library. Release notes remain available for reference:
    • New Features
      • Support for Access Control, which allows users to specify PINs for networked devices to restrict access to them from unauthenticated Shure control software.
      • AMX/Crestron control string to get the ULXD firmware version.
        • Command: < GET FW_VER >
      • Ability to reverse polarity on ULXD1 and ULXD1LEMO3 bodypacks. To reverse polarity, use these options:
        • Bodypack Utilities menu: UTILITY > POLARITY
        • Save the IR preset on the receiver and then IR sync to the bodypack to incorporate the polarity change: IR PRESETS > BP POLARITY
    • Improvements
      • Added new VHF frequency bands:
        • V50
        • V51
      • Dante™ update to software version 3.9.6.1 and firmware version 4.0.0.6
      • Improved audio stability in marginal RF conditions
    • Known Issues
      • ShurePlus Channels version 1.2 does not support ULX-D firmware version 2.0 or later.
      • QLX-D firmware version 1.1.15 or earlier does not support ULX-D firmware version 2.0 or later.
    • Notes
      • Users must update all transmitters used with receivers via IR. After the receiver is updated, follow these steps:
        1. Go to the receiver menu: DEVICE UTILITIES > TX FW UPDATE
        2. Align the infrared ports with the transmitter
        3. Press ENTER.
      • For operation of ULX-D devices with other Shure networked systems, see the following list of minimum firmware versions that are supported with ULX-D version 2.0.19:
        • ULX-D ULXD1/2 Transmitters and ULXD4, ULXD4D, ULXD4Q Receivers 2.0.19
        • Wireless Workbench 6.12
        • Shure Update Utility 2.2.2.8
1.7.34
December 10, 2015

Recommendation

Update all ULX-D devices in a configuration to the same firmware version

Improvement

  • Added new frequency band Z16 (1240 – 1260 MHz) for Japan

Notes

  • Fixed bug relating to encryption mismatch conditions.
  • Fixed IR LED behavior when firmware updating transmitters.
  • Transmitters to be used with receivers must be updated via IR. After the receiver is updated, follow these steps:
    1. Go to the receiver menu: DEVICE UTILITIES > TX FW UPDATE
    2. Align the infrared ports with the transmitter
    3. Press ENTER.
  • For operation of ULX-D devices with other Shure networked systems, see the following list of minimum firmware versions that are supported with ULX-D version 1.7.34:
    • QLX-D receiver 1.0.15
1.6.11
October 20, 2015

New Feature

  • ULXD4, ULXD4D, and ULXD4Q receivers can now power two UA864 antennas in parallel per receiver input for a total of four antennas. To view an example of a similar setup, with different antennas, see the FAQ: Antenna Distribution – 2 Rooms, 4 Antennas, which also includes information on how to modify the UA221 passive antenna accessory.

Notes

  • Transmitters to be used with receivers must be updated via IR. After the receiver is updated, follow these steps:
    1. Go to the receiver menu: DEVICE UTILITIES > TX FW UPDATE
    2. Align the infrared ports with the transmitter
    3. Press ENTER.
  • For operation of ULX-D devices with other Shure networked systems, see the following list of minimum firmware versions that are supported with ULX-D version 1.6.11:
    • QLX-D receiver 1.0.15
1.6.10
July 9, 2015

Improvements

  • Added new frequency bands:
    • Americas (except Brazil): X52: 902-928 MHz
    • Brazil: X53: 902-907.5, 915-928 MHz
    • Australia: X54: 915-928 MHz

Notes

  • Transmitters to be used with receivers must be updated via IR. After the receiver is updated, follow these steps:
    1. Go to the receiver menu: DEVICE UTILITIES > TX FW UPDATE
    2. Align the infrared ports with the transmitter
    3. Press ENTER.
  • For operation of ULX-D devices with other Shure networked systems, see the following list of minimum firmware versions that are supported with ULX-D version 1.6.10:
    • QLX-D receiver 1.0.15
1.6.7
May 29, 2015

Notes

  • For operation of ULX-D devices with other Shure networked systems, see the following list of minimum firmware versions that are supported with ULX-D version 1.6.7:
    • ULX-D ULXD1/2 Transmitters and ULXD4, ULXD4D, ULXD4Q Receivers 1.5.6
    • Axient AXT400 Receivers and AXT600 Spectrum Managers 1.15.3
    • Wireless Workbench 6 version 6.10.3
1.6.6
February 4, 2015

Notes

  • For operation of ULX-D devices with other Shure networked systems, see the following list of minimum firmware versions that are supported with ULX-D version 1.6.6:
    • ULX-D ULXD1/2 Transmitters and ULXD4, ULXD4D, ULXD4Q Receivers 1.5.6
    • Axient AXT400 Receivers and AXT600 Spectrum Managers 1.15.3
    • Wireless Workbench 6 version 6.10.3
1.5.6
June 25, 2014

New Features

  • ULX-D/QLX-D Interoperability support. This release is required to support using ULX-D transmitters with QLX-D receivers. The following limitations apply:
    • QLX-D transmitters must be manually tuned to the same frequency as ULX-D receivers.
    • Encryption must be disabled on both systems.
    • QLX-D will not display transmitter type, but Wireless Workbench 6 will display the transmitter type as ULXD1/ULXD2.

Notes

  • After updating the ULXD4 Single Receiver the user is required to reset the unit to Default Settings (DEVICE UTILITIES/SYSTEM RESET/RESTORE/DEFAULT SETTINGS).
  • For operation of ULX-D devices with other Shure networked systems, see the following list of minimum firmware versions that are supported with ULX-D version 1.5.6:
    • ULX-D ULXD1/2 Transmitters and ULXD4, ULXD4D, ULXD4Q Receivers 1.5.6
    • Axient AXT400 Receivers and AXT600 Spectrum Managers 1.15.3
    • Wireless Workbench 6 version 6.10.0
1.4.18
April 7, 2014

Notes

  • After updating the ULXD4 Single Receiver the user is required to reset the unit to Default Settings (DEVICE UTILITIES/SYSTEM RESET/RESTORE/DEFAULT SETTINGS).
  • For operation of ULX-D devices with other Shure networked systems, see the following list of minimum firmware versions that are supported with ULX-D version 1.4.18:
    • ULXD1/2 ULX-D Transmitters 1.4.18
    • ULXD4, ULXD4D, ULXD4Q ULX-D Receivers 1.4.18
    • AXT400 Axient Receiver 1.14.6
    • Wireless Workbench 6 version 6.9.0
1.4.14
January 30, 2014

Notes

  • After updating the ULXD4 Single Receiver the user is required to reset the unit to Default Settings (DEVICE UTILITIES/SYSTEM RESET/RESTORE/DEFAULT SETTINGS).
  • For operation of ULX-D devices with other Shure networked systems, see the following list of minimum firmware versions that are supported with ULX-D version 1.4.14:
    • ULXD1/2 ULXD Transmitters 1.4.14
    • ULXD4, ULXD4D, ULXD4Q ULX-D Receivers 1.4.14
    • AXT400 Axient Receiver 1.14.6
    • Wireless Workbench 6 version 6.9.0
1.4.8
December 9, 2013

Notes

  • Transmitters to be used with receivers must be updated via IR. After updating the receiver, select Device Utilities>TX FW Update> from the receiver menu and align the infrared ports with the transmitter before selecting ‘ENTER’.
  • For operation of ULX-D devices with other Shure networked systems, see the following list of minimum firmware versions that are supported with ULX-D version 1.4.8:
    • ULXD1/2 ULXD Transmitters 1.4.8
    • ULXD4, ULXD4D, ULXD4Q ULX-D Receivers 1.4.8
    • AXT400 Axient Receiver 1.13.5
    • Wireless Workbench 6 Beta version 6.8.1
1.3.6
July 3, 2013

New Features

  • Transmitter "Mute Mode"
    • A mode that changes the functionality of transmitter power switch from "power on/off" to "mute on/off". This feature is enabled/disabled through the transmitter menu, within the UTILITIES section of the menu structure. This functionality as also been added to the IR PRESETS list.
    • Transmitters will communicate via the side channel when/if Mute Mode has been engaged (displayed in Wireless Workbench) and when/if the transmitter has been muted (displayed in Wireless Workbench and the receiver).

Improvements

  • Added support for the X51 frequency band for use in Korea
  • Minor UI text changes for consistency across wireless lines and in Wireless Workbench.

Notes

  • After updating a ULX-D transmitter from any firmware version to 1.3.6, the transmitter will factory reset itself automatically.
  • For operation of ULX-D devices with other Shure networked systems, see the following list of minimum firmware versions that are supported with ULX-D version 1.3.6:
    • ULXD1/2 ULXD Transmitters 1.3.6
    • ULXD4, ULXD4D, ULXD4Q ULX-D Receivers 1.3.6
    • AXT400 Axient Receiver 1.10.2
    • Wireless Workbench 6 Beta version 6.6.1
1.2.14
July 9, 2012

New Features

Improvements

  • Extended control of several parameters within Wireless Workbench, including Frequency Diversity Bodypack Source Indication (for ULX-D Dual and Quad receivers only)
  • Various system and component bug fixes and improvements

Notes

  • For operation of ULX-D devices with other Shure networked systems, see the following list of minimum firmware versions that are supported with ULX-D version 1.2.14:
    • ULXD1/2 ULXD Transmitters 1.2.14
    • ULXD4, ULXD4D, ULXD4Q ULX-D Receivers 1.2.14
    • Wireless Workbench 6 Beta version 6.4.0

Associated products

ULXD1

Up to 12 hours of use with rechargeable battery. 330 ft (100 m) operating range. TA4M and LEMO3 versions available.

ULXD2/B58

With an interchangeable BETA 58A® microphone cartridge, the ULXD2/B58 delivers uncompromising audio quality and RF performance, and AES 256-bit encryption for secure transmission.

ULXD2/B87A

With an interchangeable BETA®87A microphone cartridge, the ULXD2/B87A delivers uncompromising audio quality and RF performance, and AES 256-bit encryption for secure transmission.

ULXD2/B87C

With an interchangeable BETA®87C microphone cartridge, the ULXD2/B87C delivers uncompromising audio quality and RF performance, and AES 256-bit encryption for secure transmission.

ULXD2/K8

Includes the KSM8 Microphone and ULXD2 Handheld Wireless Transmitter to deliver outstanding sound for touring professionals the world over.

ULXD2/KSM9

With an interchangeable KSM9 microphone cartridge, the ULXD2/KSM9 delivers uncompromising audio quality and RF performance, and AES 256-bit encryption for secure transmission.

ULXD2/KSM9HS

With an interchangeable KSM9HS microphone cartridge, the ULXD2/KSM9HS delivers uncompromising audio quality and RF performance, and AES 256-bit encryption for secure transmission.

ULXD2/SM58

With an interchangeable SM58® microphone cartridge, the ULXD2/SM58 delivers uncompromising audio quality and RF performance, and AES 256-bit encryption for secure transmission.

ULXD2/SM86

With an interchangeable SM86 microphone cartridge, the ULXD2/SM86 delivers uncompromising audio quality and RF performance, and AES 256-bit encryption for secure transmission.

ULXD2/SM87

With an interchangeable SM87A microphone cartridge, the ULXD2/SM87 delivers uncompromising audio quality and RF performance, and AES 256-bit encryption for secure transmission.